Silicone Water Bottle Certifications, Explained
Key facts at a glance
- FDA 21 CFR 177.2600 covers rubber articles for repeated food contact in the US.
- LFGB is the German food and feed code; buyers usually ask for the LFGB test report, not a certificate.
- CPSIA applies to products for children 12 and under in the US โ lead and phthalate limits.
- EN 14350 covers child drinking equipment; EN 71-2/-3 covers flammability and migration for toy-like items.
- A test report is only valid for the material and colour it names โ check page one.
Buyers ask for "FDA and LFGB" on almost every silicone bottle order, and suppliers confirm almost every request. The gap between the two is where problems live. This page explains what each standard actually covers, so you can read a test report instead of trusting a logo on a catalogue page.
First: "food-grade silicone" is not a certification
There is no single international "food-grade silicone" certificate. The phrase describes a material that meets one or more of the regulations below. Legally, a supplier must be able to tell you which regulation, tested by which lab, on which material formulation and colour.
United States: FDA 21 CFR 177.2600
This is the US Food and Drug Administration regulation for rubber articles intended for repeated use in contact with food. For silicone it is the baseline expectation. The test extracts the material under specified conditions and checks that extractives stay within limits. Requests sometimes cite "FDA food grade" without a regulation number โ 177.2600 is the one that applies to a reusable bottle.
Germany and the EU: LFGB
LFGB (Lebensmittel- und Futtermittelgesetzbuch) is the German food and feed code. For food-contact articles, testing includes a sensory evaluation (odour and taste transfer) plus migration tests into food simulants. EU buyers usually accept an LFGB report because it is stricter on organoleptic properties than a basic extraction test.
At EU level, Regulation (EC) 1935/2004 is the framework: materials must not transfer constituents in quantities that endanger health or unacceptably change the food. Specific measures for plastics sit in Regulation (EU) 10/2011; silicone is regulated nationally in several member states, which is why LFGB reports are so widely used in practice.
Children's products in the US: CPSIA
The Consumer Product Safety Improvement Act applies to products designed or intended primarily for children 12 and under. In practice for a kids' bottle it means:
- Lead limits in substrate and paint โ 100 ppm in substrate under current rules.
- Phthalate limits โ 0.1% for the restricted phthalates in children's toys and childcare articles.
- Tracking labels and, for importers, a Children's Product Certificate backed by third-party testing.
Note that CPSIA compliance is the importer's legal obligation; the factory supplies the test data that supports it. Ask who the third-party lab is and whether the report is issued to your company.
Child drinking equipment: EN 14350
EN 14350 covers drinking equipment for children โ bottles, spouts, straws and handles. It addresses mechanical hazards (small parts, sharp edges, attachment strength) and chemical requirements including migration limits and, in the current version, BPA-related provisions. If your bottle has a straw, spout or free-flowing lid and is aimed at young children, this is the relevant standard in the EU/UK.
Toy-like bottles: EN 71-2 and EN 71-3
Character-shaped bottles that children also play with are sometimes assessed as toys. EN 71-1 covers mechanical and physical properties, EN 71-2 flammability, and EN 71-3 migration of certain elements. Many character bottles are dual-purpose, so buyers increasingly request EN 71 alongside EN 14350 to cover retail scrutiny.
Other marks you will see: CE, REACH, RoHS, UKCA
- CE is a declaration of conformity to applicable EU legislation โ meaningful only when the underlying test reports exist.
- REACH covers chemical substances; for silicone articles the relevant parts are the SVHC candidate list and restriction annex.
- RoHS is electrical equipment โ it makes sense for bottles with electronic parts, not for a plain silicone bottle.
- UKCA is the UK equivalent of CE for the Great Britain market.
If a quote lists all of these for a simple bottle, that is a sign the certificates were copied from a template rather than issued for your product.
Factory audits are separate from product tests
Product reports say nothing about the workplace or process control. Retailers therefore ask for:
- BSCI or Sedex 4P โ social compliance audits covering labour, safety and environment.
- ISO 9001 โ quality management system; ISO 14001 โ environmental management.
- ISO 13485 โ medical device quality processes, relevant if you also source feeding or care products.
- IATF 16949 โ automotive quality discipline, a strong signal for process consistency.
- Disney FAMA โ required to produce licensed character merchandise.
Which documents to request with an order
- Test report per material and colour family, with the material description visible on page one.
- Certificate of compliance or declaration of conformity naming your product and market.
- Factory audit summary with certificate number and expiry date.
- For children's items: third-party CPSIA test data and the tracking label artwork.
- Batch-level QC record for the shipment (AQL sampling result, leak test result).
How to read a test report in 60 seconds
- Check the applicant name โ is it the factory or an unrelated trading company?
- Check the sample description โ colour, hardness, and part tested.
- Check the standard and clause โ 177.2600, LFGB ยง30/31, EN 14350, and so on.
- Check the test date โ a five-year-old report on a discontinued formulation is worthless.
- Check the result page โ "pass" must be supported by measured values, not a summary stamp.
Jewelives supplies FDA, LFGB, CE, CPSIA, EN 14350, EN 71-2/3, REACH, RoHS and UKCA documentation from a BSCI-audited, ISO 9001/14001/13485 and IATF 16949 factory. Documentation is available on request with any quotation โ see the catalogue or send us the model numbers you are evaluating.
Frequently asked questions
Is FDA certification required for silicone water bottles sold in the US?
There is no FDA 'certificate' as such. What matters is that the material complies with FDA 21 CFR 177.2600 and is supported by a test report. Importers should hold that report and be able to identify the specific material and colour tested.
What is the difference between FDA and LFGB testing?
FDA 21 CFR 177.2600 focuses on extractives from rubber articles for repeated food contact. LFGB adds sensory evaluation (odour and taste) and migration testing into food simulants, which is why EU buyers commonly require it.
Do kids' silicone bottles need CPSIA testing?
Yes, if they are intended for children 12 and under in the US market. CPSIA covers lead and phthalate limits, and importers need supporting third-party test data plus tracking labels.
What does EN 14350 cover?
EN 14350 is the European standard for drinking equipment for children. It covers mechanical safety such as small parts and attachment strength, and chemical requirements including migration limits.
Are CE and LFGB the same thing?
No. CE is a declaration that the product conforms to applicable EU legislation. LFGB is a German national testing regime widely used to demonstrate food-contact safety. CE marking without underlying test reports is not evidence of compliance.
Need a quotation for silicone water bottles?
Send the models and quantities you are evaluating. Our team replies with price, MOQ, sample timing and lead time within 24 hours.
Written by the Jewelives export team in Shenzhen. Sources: FDA 21 CFR 177.2600, LFGB, CPSIA, EN 14350, EN 71, Regulation (EC) 1935/2004. Company figures reflect our own factory records.
